Kea 2.7.5
Classes | Macros | Typedefs | Functions | Variables
d2_lexer.cc File Reference
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <stdlib.h>
#include <cctype>
#include <cerrno>
#include <climits>
#include <cstdint>
#include <cstdlib>
#include <string>
#include <d2/parser_context.h>
#include <asiolink/io_address.h>
#include <boost/lexical_cast.hpp>
#include <exceptions/exceptions.h>
#include <unistd.h>
+ Include dependency graph for d2_lexer.cc:

Go to the source code of this file.

Classes

struct  yy_buffer_state
 
struct  yy_trans_info
 

Macros

#define BEGIN   (yy_start) = 1 + 2 *
 
#define COMMENT   1
 
#define d2_parser__create_buffer_ALREADY_DEFINED
 
#define d2_parser__delete_buffer_ALREADY_DEFINED
 
#define d2_parser__flex_debug_ALREADY_DEFINED
 
#define d2_parser__flush_buffer_ALREADY_DEFINED
 
#define d2_parser__init_buffer_ALREADY_DEFINED
 
#define d2_parser__load_buffer_state_ALREADY_DEFINED
 
#define d2_parser__scan_buffer_ALREADY_DEFINED
 
#define d2_parser__scan_bytes_ALREADY_DEFINED
 
#define d2_parser__scan_string_ALREADY_DEFINED
 
#define d2_parser__switch_to_buffer_ALREADY_DEFINED
 
#define d2_parser_alloc_ALREADY_DEFINED
 
#define d2_parser_ensure_buffer_stack_ALREADY_DEFINED
 
#define d2_parser_free_ALREADY_DEFINED
 
#define d2_parser_in_ALREADY_DEFINED
 
#define d2_parser_leng_ALREADY_DEFINED
 
#define d2_parser_lex_ALREADY_DEFINED
 
#define d2_parser_lineno_ALREADY_DEFINED
 
#define d2_parser_out_ALREADY_DEFINED
 
#define d2_parser_pop_buffer_state_ALREADY_DEFINED
 
#define d2_parser_push_buffer_state_ALREADY_DEFINED
 
#define d2_parser_realloc_ALREADY_DEFINED
 
#define d2_parser_restart_ALREADY_DEFINED
 
#define d2_parser_text_ALREADY_DEFINED
 
#define d2_parser_wrap()   (/*CONSTCOND*/1)
 
#define d2_parser_wrap_ALREADY_DEFINED
 
#define DIR_ENTER   2
 
#define DIR_EXIT   4
 
#define DIR_INCLUDE   3
 
#define ECHO   do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0)
 
#define EOB_ACT_CONTINUE_SCAN   0
 
#define EOB_ACT_END_OF_FILE   1
 
#define EOB_ACT_LAST_MATCH   2
 
#define FLEX_DEBUG
 
#define FLEX_SCANNER
 
#define FLEXINT_H
 
#define INITIAL   0
 
#define INT16_MAX   (32767)
 
#define INT16_MIN   (-32767-1)
 
#define INT32_MAX   (2147483647)
 
#define INT32_MIN   (-2147483647-1)
 
#define INT8_MAX   (127)
 
#define INT8_MIN   (-128)
 
#define REJECT   reject_used_but_not_detected
 
#define SIZE_MAX   (~(size_t)0)
 
#define UINT16_MAX   (65535U)
 
#define UINT32_MAX   (4294967295U)
 
#define UINT8_MAX   (255U)
 
#define unput(c)   yyunput( c, (yytext_ptr) )
 
#define YY_AT_BOL()   (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
 
#define YY_BREAK   /*LINTED*/break;
 
#define YY_BUF_SIZE   16384
 
#define YY_BUFFER_EOF_PENDING   2
 
#define YY_BUFFER_NEW   0
 
#define YY_BUFFER_NORMAL   1
 
#define yy_create_buffer   d2_parser__create_buffer
 
#define YY_CURRENT_BUFFER
 
#define YY_CURRENT_BUFFER_LVALUE   (yy_buffer_stack)[(yy_buffer_stack_top)]
 
#define YY_DECL   int yylex (void)
 
#define YY_DECL_IS_OURS   1
 
#define yy_delete_buffer   d2_parser__delete_buffer
 
#define YY_DO_BEFORE_ACTION
 
#define YY_END_OF_BUFFER   91
 
#define YY_END_OF_BUFFER_CHAR   0
 
#define YY_EXIT_FAILURE   2
 
#define YY_EXTRA_TYPE   void *
 
#define YY_FATAL_ERROR(msg)   isc::d2::D2ParserContext::fatal(msg)
 
#define yy_flex_debug   d2_parser__flex_debug
 
#define YY_FLEX_MAJOR_VERSION   2
 
#define YY_FLEX_MINOR_VERSION   6
 
#define YY_FLEX_SUBMINOR_VERSION   4
 
#define yy_flush_buffer   d2_parser__flush_buffer
 
#define YY_FLUSH_BUFFER   yy_flush_buffer( YY_CURRENT_BUFFER )
 
#define yy_init_buffer   d2_parser__init_buffer
 
#define YY_INPUT(buf, result, max_size)
 
#define YY_INT_ALIGNED   short int
 
#define YY_LESS_LINENO(n)
 
#define YY_LINENO_REWIND_TO(ptr)
 
#define yy_load_buffer_state   d2_parser__load_buffer_state
 
#define YY_MORE_ADJ   0
 
#define yy_new_buffer   yy_create_buffer
 
#define YY_NEW_FILE   yyrestart( yyin )
 
#define YY_NO_INPUT   1
 
#define YY_NULL   0
 
#define YY_NUM_RULES   90
 
#define YY_READ_BUF_SIZE   8192
 
#define YY_RESTORE_YY_MORE_OFFSET
 
#define YY_RULE_SETUP    YY_USER_ACTION
 
#define YY_SC_TO_UI(c)   ((YY_CHAR) (c))
 
#define yy_scan_buffer   d2_parser__scan_buffer
 
#define yy_scan_bytes   d2_parser__scan_bytes
 
#define yy_scan_string   d2_parser__scan_string
 
#define yy_set_bol(at_bol)
 
#define yy_set_interactive(is_interactive)
 
#define YY_SKIP_YYWRAP
 
#define YY_START   (((yy_start) - 1) / 2)
 
#define YY_START_STACK_INCR   25
 
#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
 
#define YY_STATE_EOF(state)   (YY_END_OF_BUFFER + state + 1)
 
#define YY_STRUCT_YY_BUFFER_STATE
 
#define yy_switch_to_buffer   d2_parser__switch_to_buffer
 
#define YY_TYPEDEF_YY_BUFFER_STATE
 
#define YY_TYPEDEF_YY_SIZE_T
 
#define YY_USER_ACTION   driver.loc_.columns(yyleng);
 
#define yyalloc   d2_parser_alloc
 
#define yyconst   const
 
#define yyensure_buffer_stack   d2_parser_ensure_buffer_stack
 
#define yyfree   d2_parser_free
 
#define yyget_debug   d2_parser_get_debug
 
#define yyget_extra   d2_parser_get_extra
 
#define yyget_in(void)   d2_parser_get_in
 Get the input stream.
 
#define yyget_leng(void)   d2_parser_get_leng
 Get the length of the current token.
 
#define yyget_lineno(void)   d2_parser_get_lineno
 Get the current line number.
 
#define yyget_out(void)   d2_parser_get_out
 Get the output stream.
 
#define yyget_text(void)   d2_parser_get_text
 Get the current token.
 
#define yyin   d2_parser_in
 
#define yyleng   d2_parser_leng
 
#define yyless(n)
 
#define yyless(n)
 
#define yylex   d2_parser_lex
 
#define yylex_destroy   d2_parser_lex_destroy
 
#define yylex_init   d2_parser_lex_init
 
#define yylex_init_extra   d2_parser_lex_init_extra
 
#define yylineno   d2_parser_lineno
 
#define yymore()   yymore_used_but_not_detected
 
#define yynoreturn
 
#define yyout   d2_parser_out
 
#define yypop_buffer_state(void)   d2_parser_pop_buffer_state
 Removes and deletes the top of the stack, if present.
 
#define yypush_buffer_state   d2_parser_push_buffer_state
 
#define yyrealloc   d2_parser_realloc
 
#define yyrestart   d2_parser_restart
 
#define yyset_debug   d2_parser_set_debug
 
#define yyset_extra   d2_parser_set_extra
 
#define yyset_in   d2_parser_set_in
 
#define yyset_lineno   d2_parser_set_lineno
 
#define yyset_out   d2_parser_set_out
 
#define YYSTATE   YY_START
 
#define YYTABLES_NAME   "yytables"
 
#define yyterminate()   return YY_NULL
 
#define yytext   d2_parser_text
 
#define yytext_ptr   yytext
 
#define yywrap   d2_parser_wrap
 
#define yywrap()   1
 

Typedefs

typedef short int flex_int16_t
 
typedef int flex_int32_t
 
typedef signed char flex_int8_t
 
typedef unsigned short int flex_uint16_t
 
typedef unsigned int flex_uint32_t
 
typedef unsigned char flex_uint8_t
 
typedef struct yy_buffer_state * YY_BUFFER_STATE
 
typedef flex_uint8_t YY_CHAR
 
typedef size_t yy_size_t
 
typedef int yy_state_type
 

Functions

 if (!(yy_init))
 
 if (start_token_flag)
 
 while (1)
 
YY_BUFFER_STATE yy_create_buffer (FILE *file, int size)
 Allocate and initialize an input buffer state.
 
void yy_delete_buffer (YY_BUFFER_STATE b)
 Destroy the buffer.
 
void yy_flush_buffer (YY_BUFFER_STATE b)
 Discard all buffered characters.
 
YY_BUFFER_STATE yy_scan_buffer (char *base, yy_size_t size)
 Setup the input buffer state to scan directly from a user-specified character buffer.
 
YY_BUFFER_STATE yy_scan_bytes (const char *yybytes, int _yybytes_len)
 Setup the input buffer state to scan the given bytes.
 
YY_BUFFER_STATE yy_scan_string (const char *yystr)
 Setup the input buffer state to scan a string.
 
void yy_switch_to_buffer (YY_BUFFER_STATE new_buffer)
 Switch to a different input buffer.
 
void * yyalloc (yy_size_t)
 
void yyfree (void *)
 
void yypush_buffer_state (YY_BUFFER_STATE new_buffer)
 Pushes the new state onto the stack.
 
void * yyrealloc (void *, yy_size_t)
 
void yyrestart (FILE *input_file)
 Immediately switch to a different input stream.
 
void yyset_debug (int debug_flag)
 
void yyset_extra (YY_EXTRA_TYPE user_defined)
 
void yyset_in (FILE *_in_str)
 Set the input stream.
 
void yyset_lineno (int _line_number)
 Set the current line number.
 
void yyset_out (FILE *_out_str)
 

Variables

int yy_act
 
char * yy_bp
 
char * yy_cp
 
 YY_DECL
 The main scanner function which does all the work.
 
int yy_flex_debug = 1
 
FILE * yyin = NULL
 
int yyleng
 
int yylineno = 1
 
FILE * yyout = NULL
 
char * yytext
 

Macro Definition Documentation

◆ BEGIN

#define BEGIN   (yy_start) = 1 + 2 *

Definition at line 414 of file d2_lexer.cc.

Referenced by while().

◆ COMMENT

#define COMMENT   1

Definition at line 1245 of file d2_lexer.cc.

Referenced by while().

◆ d2_parser__create_buffer_ALREADY_DEFINED

#define d2_parser__create_buffer_ALREADY_DEFINED

Definition at line 54 of file d2_lexer.cc.

◆ d2_parser__delete_buffer_ALREADY_DEFINED

#define d2_parser__delete_buffer_ALREADY_DEFINED

Definition at line 60 of file d2_lexer.cc.

◆ d2_parser__flex_debug_ALREADY_DEFINED

#define d2_parser__flex_debug_ALREADY_DEFINED

Definition at line 280 of file d2_lexer.cc.

◆ d2_parser__flush_buffer_ALREADY_DEFINED

#define d2_parser__flush_buffer_ALREADY_DEFINED

Definition at line 90 of file d2_lexer.cc.

◆ d2_parser__init_buffer_ALREADY_DEFINED

#define d2_parser__init_buffer_ALREADY_DEFINED

Definition at line 84 of file d2_lexer.cc.

◆ d2_parser__load_buffer_state_ALREADY_DEFINED

#define d2_parser__load_buffer_state_ALREADY_DEFINED

Definition at line 96 of file d2_lexer.cc.

◆ d2_parser__scan_buffer_ALREADY_DEFINED

#define d2_parser__scan_buffer_ALREADY_DEFINED

Definition at line 66 of file d2_lexer.cc.

◆ d2_parser__scan_bytes_ALREADY_DEFINED

#define d2_parser__scan_bytes_ALREADY_DEFINED

Definition at line 78 of file d2_lexer.cc.

◆ d2_parser__scan_string_ALREADY_DEFINED

#define d2_parser__scan_string_ALREADY_DEFINED

Definition at line 72 of file d2_lexer.cc.

◆ d2_parser__switch_to_buffer_ALREADY_DEFINED

#define d2_parser__switch_to_buffer_ALREADY_DEFINED

Definition at line 102 of file d2_lexer.cc.

◆ d2_parser_alloc_ALREADY_DEFINED

#define d2_parser_alloc_ALREADY_DEFINED

Definition at line 236 of file d2_lexer.cc.

◆ d2_parser_ensure_buffer_stack_ALREADY_DEFINED

#define d2_parser_ensure_buffer_stack_ALREADY_DEFINED

Definition at line 120 of file d2_lexer.cc.

◆ d2_parser_free_ALREADY_DEFINED

#define d2_parser_free_ALREADY_DEFINED

Definition at line 248 of file d2_lexer.cc.

◆ d2_parser_in_ALREADY_DEFINED

#define d2_parser_in_ALREADY_DEFINED

Definition at line 268 of file d2_lexer.cc.

◆ d2_parser_leng_ALREADY_DEFINED

#define d2_parser_leng_ALREADY_DEFINED

Definition at line 262 of file d2_lexer.cc.

◆ d2_parser_lex_ALREADY_DEFINED

#define d2_parser_lex_ALREADY_DEFINED

Definition at line 126 of file d2_lexer.cc.

◆ d2_parser_lineno_ALREADY_DEFINED

#define d2_parser_lineno_ALREADY_DEFINED

Definition at line 286 of file d2_lexer.cc.

◆ d2_parser_out_ALREADY_DEFINED

#define d2_parser_out_ALREADY_DEFINED

Definition at line 274 of file d2_lexer.cc.

◆ d2_parser_pop_buffer_state_ALREADY_DEFINED

#define d2_parser_pop_buffer_state_ALREADY_DEFINED

Definition at line 114 of file d2_lexer.cc.

◆ d2_parser_push_buffer_state_ALREADY_DEFINED

#define d2_parser_push_buffer_state_ALREADY_DEFINED

Definition at line 108 of file d2_lexer.cc.

◆ d2_parser_realloc_ALREADY_DEFINED

#define d2_parser_realloc_ALREADY_DEFINED

Definition at line 242 of file d2_lexer.cc.

◆ d2_parser_restart_ALREADY_DEFINED

#define d2_parser_restart_ALREADY_DEFINED

Definition at line 132 of file d2_lexer.cc.

◆ d2_parser_text_ALREADY_DEFINED

#define d2_parser_text_ALREADY_DEFINED

Definition at line 256 of file d2_lexer.cc.

◆ d2_parser_wrap

#define d2_parser_wrap ( )    (/*CONSTCOND*/1)

Definition at line 652 of file d2_lexer.cc.

◆ d2_parser_wrap_ALREADY_DEFINED

#define d2_parser_wrap_ALREADY_DEFINED

Definition at line 228 of file d2_lexer.cc.

◆ DIR_ENTER

#define DIR_ENTER   2

Definition at line 1246 of file d2_lexer.cc.

Referenced by while().

◆ DIR_EXIT

#define DIR_EXIT   4

Definition at line 1248 of file d2_lexer.cc.

Referenced by while().

◆ DIR_INCLUDE

#define DIR_INCLUDE   3

Definition at line 1247 of file d2_lexer.cc.

Referenced by while().

◆ ECHO

#define ECHO   do { if (fwrite( yytext, (size_t) yyleng, 1, yyout )) {} } while (0)

Definition at line 1370 of file d2_lexer.cc.

Referenced by while().

◆ EOB_ACT_CONTINUE_SCAN

#define EOB_ACT_CONTINUE_SCAN   0

Definition at line 464 of file d2_lexer.cc.

Referenced by while().

◆ EOB_ACT_END_OF_FILE

#define EOB_ACT_END_OF_FILE   1

Definition at line 465 of file d2_lexer.cc.

Referenced by while().

◆ EOB_ACT_LAST_MATCH

#define EOB_ACT_LAST_MATCH   2

Definition at line 466 of file d2_lexer.cc.

Referenced by while().

◆ FLEX_DEBUG

#define FLEX_DEBUG

Definition at line 655 of file d2_lexer.cc.

◆ FLEX_SCANNER

#define FLEX_SCANNER

Definition at line 41 of file d2_lexer.cc.

◆ FLEXINT_H

#define FLEXINT_H

Definition at line 311 of file d2_lexer.cc.

◆ INITIAL

#define INITIAL   0

Definition at line 1244 of file d2_lexer.cc.

Referenced by while().

◆ INT16_MAX

#define INT16_MAX   (32767)

Definition at line 353 of file d2_lexer.cc.

◆ INT16_MIN

#define INT16_MIN   (-32767-1)

Definition at line 344 of file d2_lexer.cc.

◆ INT32_MAX

#define INT32_MAX   (2147483647)

Definition at line 356 of file d2_lexer.cc.

◆ INT32_MIN

#define INT32_MIN   (-2147483647-1)

Definition at line 347 of file d2_lexer.cc.

◆ INT8_MAX

#define INT8_MAX   (127)

Definition at line 350 of file d2_lexer.cc.

◆ INT8_MIN

#define INT8_MIN   (-128)

Definition at line 341 of file d2_lexer.cc.

◆ REJECT

#define REJECT   reject_used_but_not_detected

Definition at line 1168 of file d2_lexer.cc.

◆ SIZE_MAX

#define SIZE_MAX   (~(size_t)0)

Definition at line 369 of file d2_lexer.cc.

◆ UINT16_MAX

#define UINT16_MAX   (65535U)

Definition at line 362 of file d2_lexer.cc.

◆ UINT32_MAX

#define UINT32_MAX   (4294967295U)

Definition at line 365 of file d2_lexer.cc.

◆ UINT8_MAX

#define UINT8_MAX   (255U)

Definition at line 359 of file d2_lexer.cc.

◆ unput

#define unput ( c)    yyunput( c, (yytext_ptr) )

Definition at line 484 of file d2_lexer.cc.

◆ YY_AT_BOL

#define YY_AT_BOL ( )    (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)

Definition at line 647 of file d2_lexer.cc.

◆ YY_BREAK

#define YY_BREAK   /*LINTED*/break;

Definition at line 1472 of file d2_lexer.cc.

Referenced by while().

◆ YY_BUF_SIZE

#define YY_BUF_SIZE   16384

Definition at line 436 of file d2_lexer.cc.

Referenced by if(), and yyrestart().

◆ YY_BUFFER_EOF_PENDING

#define YY_BUFFER_EOF_PENDING   2

Definition at line 551 of file d2_lexer.cc.

◆ YY_BUFFER_NEW

#define YY_BUFFER_NEW   0

Definition at line 539 of file d2_lexer.cc.

Referenced by while(), yy_flush_buffer(), and yy_scan_buffer().

◆ YY_BUFFER_NORMAL

#define YY_BUFFER_NORMAL   1

Definition at line 540 of file d2_lexer.cc.

Referenced by while().

◆ yy_create_buffer

#define yy_create_buffer   d2_parser__create_buffer

Definition at line 12 of file d2_lexer.cc.

Referenced by if(), and yyrestart().

◆ YY_CURRENT_BUFFER

#define YY_CURRENT_BUFFER
Value:
( (yy_buffer_stack) \
? (yy_buffer_stack)[(yy_buffer_stack_top)] \
: NULL)

Definition at line 575 of file d2_lexer.cc.

Referenced by if(), while(), yy_delete_buffer(), yy_flush_buffer(), yy_switch_to_buffer(), yypush_buffer_state(), and yyrestart().

◆ YY_CURRENT_BUFFER_LVALUE

#define YY_CURRENT_BUFFER_LVALUE   (yy_buffer_stack)[(yy_buffer_stack_top)]

Definition at line 581 of file d2_lexer.cc.

Referenced by if(), while(), yy_delete_buffer(), yy_switch_to_buffer(), yypush_buffer_state(), and yyrestart().

◆ YY_DECL

#define YY_DECL   int yylex (void)

Definition at line 1457 of file d2_lexer.cc.

◆ YY_DECL_IS_OURS

#define YY_DECL_IS_OURS   1

Definition at line 1452 of file d2_lexer.cc.

◆ yy_delete_buffer

#define yy_delete_buffer   d2_parser__delete_buffer

Definition at line 13 of file d2_lexer.cc.

◆ YY_DO_BEFORE_ACTION

#define YY_DO_BEFORE_ACTION
Value:
(yytext_ptr) = yy_bp; \
/* %% [2.0] code to fiddle yytext and yyleng for yymore() goes here \ */\
yyleng = (int) (yy_cp - yy_bp); \
(yy_hold_char) = *yy_cp; \
*yy_cp = '\0'; \
/* %% [3.0] code to copy yytext_ptr to yytext[] goes here, if %array \ */\
(yy_c_buf_p) = yy_cp;
yy_cp
char * yy_cp
Definition d2_lexer.cc:1485
yytext_ptr
#define yytext_ptr
Definition d2_lexer.cc:669
yy_bp
char * yy_bp
Definition d2_lexer.cc:1485
yyleng
#define yyleng
Definition d2_lexer.cc:26

Definition at line 685 of file d2_lexer.cc.

Referenced by while().

◆ YY_END_OF_BUFFER

#define YY_END_OF_BUFFER   91

Definition at line 695 of file d2_lexer.cc.

Referenced by while().

◆ YY_END_OF_BUFFER_CHAR

#define YY_END_OF_BUFFER_CHAR   0

Definition at line 425 of file d2_lexer.cc.

Referenced by yy_flush_buffer(), yy_scan_buffer(), and yy_scan_bytes().

◆ YY_EXIT_FAILURE

#define YY_EXIT_FAILURE   2

Definition at line 3683 of file d2_lexer.cc.

◆ YY_EXTRA_TYPE

#define YY_EXTRA_TYPE   void *

Definition at line 1263 of file d2_lexer.cc.

◆ YY_FATAL_ERROR

#define YY_FATAL_ERROR ( msg)    isc::d2::D2ParserContext::fatal(msg)

Definition at line 1214 of file d2_lexer.cc.

Referenced by while(), yy_create_buffer(), yy_scan_buffer(), and yy_scan_bytes().

◆ yy_flex_debug

#define yy_flex_debug   d2_parser__flex_debug

Definition at line 24 of file d2_lexer.cc.

Referenced by while(), and yyset_debug().

◆ YY_FLEX_MAJOR_VERSION

#define YY_FLEX_MAJOR_VERSION   2

Definition at line 42 of file d2_lexer.cc.

◆ YY_FLEX_MINOR_VERSION

#define YY_FLEX_MINOR_VERSION   6

Definition at line 43 of file d2_lexer.cc.

◆ YY_FLEX_SUBMINOR_VERSION

#define YY_FLEX_SUBMINOR_VERSION   4

Definition at line 44 of file d2_lexer.cc.

◆ yy_flush_buffer

#define yy_flush_buffer   d2_parser__flush_buffer

Definition at line 18 of file d2_lexer.cc.

◆ YY_FLUSH_BUFFER

#define YY_FLUSH_BUFFER   yy_flush_buffer( YY_CURRENT_BUFFER )

Definition at line 616 of file d2_lexer.cc.

◆ yy_init_buffer

#define yy_init_buffer   d2_parser__init_buffer

Definition at line 17 of file d2_lexer.cc.

Referenced by yy_create_buffer(), and yyrestart().

◆ YY_INPUT

#define YY_INPUT ( buf,
result,
max_size )

Definition at line 1380 of file d2_lexer.cc.

◆ YY_INT_ALIGNED

#define YY_INT_ALIGNED   short int

Definition at line 5 of file d2_lexer.cc.

◆ YY_LESS_LINENO

#define YY_LESS_LINENO ( n)

Definition at line 468 of file d2_lexer.cc.

◆ YY_LINENO_REWIND_TO

#define YY_LINENO_REWIND_TO ( ptr)

Definition at line 469 of file d2_lexer.cc.

◆ yy_load_buffer_state

#define yy_load_buffer_state ( void)    d2_parser__load_buffer_state

Definition at line 3327 of file d2_lexer.cc.

Referenced by if(), yy_flush_buffer(), yy_switch_to_buffer(), yypush_buffer_state(), and yyrestart().

◆ YY_MORE_ADJ

#define YY_MORE_ADJ   0

Definition at line 1170 of file d2_lexer.cc.

Referenced by while().

◆ yy_new_buffer

#define yy_new_buffer   yy_create_buffer

Definition at line 628 of file d2_lexer.cc.

◆ YY_NEW_FILE

#define YY_NEW_FILE   yyrestart( yyin )

Definition at line 424 of file d2_lexer.cc.

Referenced by while().

◆ YY_NO_INPUT

#define YY_NO_INPUT   1

Definition at line 1230 of file d2_lexer.cc.

◆ YY_NULL

#define YY_NULL   0

Definition at line 393 of file d2_lexer.cc.

◆ YY_NUM_RULES

#define YY_NUM_RULES   90

Definition at line 694 of file d2_lexer.cc.

◆ YY_READ_BUF_SIZE

#define YY_READ_BUF_SIZE   8192

Definition at line 1360 of file d2_lexer.cc.

◆ YY_RESTORE_YY_MORE_OFFSET

#define YY_RESTORE_YY_MORE_OFFSET

Definition at line 1171 of file d2_lexer.cc.

Referenced by while().

◆ YY_RULE_SETUP

#define YY_RULE_SETUP    YY_USER_ACTION

Definition at line 1476 of file d2_lexer.cc.

Referenced by while().

◆ YY_SC_TO_UI

#define YY_SC_TO_UI ( c)    ((YY_CHAR) (c))

Definition at line 400 of file d2_lexer.cc.

Referenced by while().

◆ yy_scan_buffer

#define yy_scan_buffer   d2_parser__scan_buffer

Definition at line 14 of file d2_lexer.cc.

Referenced by yy_scan_bytes().

◆ yy_scan_bytes

#define yy_scan_bytes   d2_parser__scan_bytes

Definition at line 16 of file d2_lexer.cc.

Referenced by yy_scan_string().

◆ yy_scan_string

#define yy_scan_string   d2_parser__scan_string

Definition at line 15 of file d2_lexer.cc.

◆ yy_set_bol

#define yy_set_bol ( at_bol)
Value:
{ \
if ( ! YY_CURRENT_BUFFER ){\
yyensure_buffer_stack (); \
YY_CURRENT_BUFFER_LVALUE = \
yy_create_buffer( yyin, YY_BUF_SIZE ); \
} \
YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
}
YY_CURRENT_BUFFER_LVALUE
#define YY_CURRENT_BUFFER_LVALUE
Definition d2_lexer.cc:581
YY_CURRENT_BUFFER
#define YY_CURRENT_BUFFER
Definition d2_lexer.cc:575
yyin
#define yyin
Definition d2_lexer.cc:25
YY_BUF_SIZE
#define YY_BUF_SIZE
Definition d2_lexer.cc:436

Definition at line 638 of file d2_lexer.cc.

◆ yy_set_interactive

#define yy_set_interactive ( is_interactive)
Value:
{ \
if ( ! YY_CURRENT_BUFFER ){ \
yyensure_buffer_stack (); \
YY_CURRENT_BUFFER_LVALUE = \
yy_create_buffer( yyin, YY_BUF_SIZE ); \
} \
YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
}

Definition at line 629 of file d2_lexer.cc.

◆ YY_SKIP_YYWRAP

#define YY_SKIP_YYWRAP

Definition at line 653 of file d2_lexer.cc.

◆ YY_START

#define YY_START   (((yy_start) - 1) / 2)

Definition at line 419 of file d2_lexer.cc.

Referenced by while().

◆ YY_START_STACK_INCR

#define YY_START_STACK_INCR   25

Definition at line 1425 of file d2_lexer.cc.

◆ YY_STATE_BUF_SIZE

#define YY_STATE_BUF_SIZE   ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))

Definition at line 442 of file d2_lexer.cc.

◆ YY_STATE_EOF

#define YY_STATE_EOF ( state)    (YY_END_OF_BUFFER + state + 1)

Definition at line 422 of file d2_lexer.cc.

Referenced by while().

◆ YY_STRUCT_YY_BUFFER_STATE

#define YY_STRUCT_YY_BUFFER_STATE

Definition at line 487 of file d2_lexer.cc.

◆ yy_switch_to_buffer

#define yy_switch_to_buffer   d2_parser__switch_to_buffer

Definition at line 20 of file d2_lexer.cc.

Referenced by yy_scan_buffer().

◆ YY_TYPEDEF_YY_BUFFER_STATE

#define YY_TYPEDEF_YY_BUFFER_STATE

Definition at line 445 of file d2_lexer.cc.

◆ YY_TYPEDEF_YY_SIZE_T

#define YY_TYPEDEF_YY_SIZE_T

Definition at line 450 of file d2_lexer.cc.

◆ YY_USER_ACTION

#define YY_USER_ACTION   driver.loc_.columns(yyleng);

Definition at line 1240 of file d2_lexer.cc.

◆ yyalloc

#define yyalloc   d2_parser_alloc

Definition at line 33 of file d2_lexer.cc.

Referenced by yy_create_buffer(), yy_scan_buffer(), and yy_scan_bytes().

◆ yyconst

#define yyconst   const

Definition at line 383 of file d2_lexer.cc.

◆ yyensure_buffer_stack

#define yyensure_buffer_stack ( void)    d2_parser_ensure_buffer_stack

Definition at line 3543 of file d2_lexer.cc.

Referenced by if(), yy_switch_to_buffer(), yypush_buffer_state(), and yyrestart().

◆ yyfree

#define yyfree   d2_parser_free

Definition at line 35 of file d2_lexer.cc.

Referenced by yy_delete_buffer().

◆ yyget_debug

#define yyget_debug ( void)    d2_parser_get_debug

Definition at line 3790 of file d2_lexer.cc.

◆ yyget_extra

#define yyget_extra ( void)    d2_parser_get_extra

Definition at line 170 of file d2_lexer.cc.

◆ yyget_in

#define yyget_in ( void)    d2_parser_get_in

Get the input stream.

Definition at line 3731 of file d2_lexer.cc.

◆ yyget_leng

#define yyget_leng ( void)    d2_parser_get_leng

Get the length of the current token.

Definition at line 3747 of file d2_lexer.cc.

◆ yyget_lineno

#define yyget_lineno ( void)    d2_parser_get_lineno

Get the current line number.

Definition at line 3722 of file d2_lexer.cc.

◆ yyget_out

#define yyget_out ( void)    d2_parser_get_out

Get the output stream.

Definition at line 3739 of file d2_lexer.cc.

◆ yyget_text

#define yyget_text ( void)    d2_parser_get_text

Get the current token.

Definition at line 3756 of file d2_lexer.cc.

◆ yyin

#define yyin   d2_parser_in

Definition at line 25 of file d2_lexer.cc.

Referenced by if(), while(), yyrestart(), and yyset_in().

◆ yyleng

#define yyleng   d2_parser_leng

Definition at line 26 of file d2_lexer.cc.

Referenced by while().

◆ yyless [1/2]

#define yyless ( n)
Value:
do \
{ \
/* Undo effects of setting up yytext. */ \
int yyless_macro_arg = (n); \
YY_LESS_LINENO(yyless_macro_arg);\
*yy_cp = (yy_hold_char); \
YY_RESTORE_YY_MORE_OFFSET \
(yy_c_buf_p) = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
YY_DO_BEFORE_ACTION; /* set up yytext again */ \
} \
while ( 0 )
YY_RESTORE_YY_MORE_OFFSET
#define YY_RESTORE_YY_MORE_OFFSET
Definition d2_lexer.cc:1171
YY_MORE_ADJ
#define YY_MORE_ADJ
Definition d2_lexer.cc:1170
YY_DO_BEFORE_ACTION
#define YY_DO_BEFORE_ACTION
Definition d2_lexer.cc:685

Definition at line 472 of file d2_lexer.cc.

◆ yyless [2/2]

#define yyless ( n)
Value:
do \
{ \
/* Undo effects of setting up yytext. */ \
int yyless_macro_arg = (n); \
YY_LESS_LINENO(yyless_macro_arg);\
yytext[yyleng] = (yy_hold_char); \
(yy_c_buf_p) = yytext + yyless_macro_arg; \
(yy_hold_char) = *(yy_c_buf_p); \
*(yy_c_buf_p) = '\0'; \
yyleng = yyless_macro_arg; \
} \
while ( 0 )
yytext
#define yytext
Definition d2_lexer.cc:31

Definition at line 472 of file d2_lexer.cc.

◆ yylex

#define yylex ( void)    d2_parser_lex

Definition at line 27 of file d2_lexer.cc.

◆ yylex_destroy

#define yylex_destroy ( void)    d2_parser_lex_destroy

Definition at line 3839 of file d2_lexer.cc.

◆ yylex_init

#define yylex_init   d2_parser_lex_init

Definition at line 140 of file d2_lexer.cc.

◆ yylex_init_extra

#define yylex_init_extra   d2_parser_lex_init_extra

Definition at line 146 of file d2_lexer.cc.

◆ yylineno

#define yylineno   d2_parser_lineno

Definition at line 28 of file d2_lexer.cc.

Referenced by yyset_lineno().

◆ yymore

#define yymore ( )    yymore_used_but_not_detected

Definition at line 1169 of file d2_lexer.cc.

◆ yynoreturn

#define yynoreturn

Definition at line 388 of file d2_lexer.cc.

◆ yyout

#define yyout   d2_parser_out

Definition at line 29 of file d2_lexer.cc.

Referenced by if(), and yyset_out().

◆ yypop_buffer_state

#define yypop_buffer_state ( void)    d2_parser_pop_buffer_state

Removes and deletes the top of the stack, if present.

The next element becomes the new top.

Definition at line 3518 of file d2_lexer.cc.

◆ yypush_buffer_state

#define yypush_buffer_state   d2_parser_push_buffer_state

Definition at line 21 of file d2_lexer.cc.

◆ yyrealloc

#define yyrealloc   d2_parser_realloc

Definition at line 34 of file d2_lexer.cc.

◆ yyrestart

#define yyrestart   d2_parser_restart

Definition at line 30 of file d2_lexer.cc.

◆ yyset_debug

#define yyset_debug   d2_parser_set_debug

Definition at line 164 of file d2_lexer.cc.

◆ yyset_extra

#define yyset_extra   d2_parser_set_extra

Definition at line 176 of file d2_lexer.cc.

◆ yyset_in

#define yyset_in   d2_parser_set_in

Definition at line 188 of file d2_lexer.cc.

◆ yyset_lineno

#define yyset_lineno   d2_parser_set_lineno

Definition at line 224 of file d2_lexer.cc.

◆ yyset_out

#define yyset_out   d2_parser_set_out

Definition at line 200 of file d2_lexer.cc.

◆ YYSTATE

#define YYSTATE   YY_START

Definition at line 420 of file d2_lexer.cc.

◆ YYTABLES_NAME

#define YYTABLES_NAME   "yytables"

Definition at line 3913 of file d2_lexer.cc.

◆ yyterminate

#define yyterminate ( )    return YY_NULL

Definition at line 1420 of file d2_lexer.cc.

◆ yytext

#define yytext   d2_parser_text

Definition at line 31 of file d2_lexer.cc.

Referenced by while().

◆ yytext_ptr

#define yytext_ptr   yytext

Definition at line 669 of file d2_lexer.cc.

Referenced by while().

◆ yywrap [1/2]

#define yywrap   d2_parser_wrap

Definition at line 32 of file d2_lexer.cc.

Referenced by while().

◆ yywrap [2/2]

#define yywrap ( )    1

Definition at line 32 of file d2_lexer.cc.

Typedef Documentation

◆ flex_int16_t

typedef short int flex_int16_t

Definition at line 333 of file d2_lexer.cc.

◆ flex_int32_t

typedef int flex_int32_t

Definition at line 334 of file d2_lexer.cc.

◆ flex_int8_t

typedef signed char flex_int8_t

Definition at line 332 of file d2_lexer.cc.

◆ flex_uint16_t

typedef unsigned short int flex_uint16_t

Definition at line 336 of file d2_lexer.cc.

◆ flex_uint32_t

typedef unsigned int flex_uint32_t

Definition at line 337 of file d2_lexer.cc.

◆ flex_uint8_t

typedef unsigned char flex_uint8_t

Definition at line 335 of file d2_lexer.cc.

◆ YY_BUFFER_STATE

typedef struct yy_buffer_state* YY_BUFFER_STATE

Definition at line 446 of file d2_lexer.cc.

◆ YY_CHAR

typedef flex_uint8_t YY_CHAR

Definition at line 656 of file d2_lexer.cc.

◆ yy_size_t

typedef size_t yy_size_t

Definition at line 451 of file d2_lexer.cc.

◆ yy_state_type

typedef int yy_state_type

Definition at line 660 of file d2_lexer.cc.

Function Documentation

◆ if() [1/2]

if ( ! yy_init)

Definition at line 1488 of file d2_lexer.cc.

References YY_BUF_SIZE, yy_create_buffer, YY_CURRENT_BUFFER, YY_CURRENT_BUFFER_LVALUE, yy_load_buffer_state, yyensure_buffer_stack, yyin, and yyout.

◆ if() [2/2]

if ( start_token_flag )

Definition at line 1536 of file d2_lexer.cc.

References isc::d2::D2Parser::make_SUB_DDNS_DOMAIN(), isc::d2::D2Parser::make_SUB_DDNS_DOMAINS(), isc::d2::D2Parser::make_SUB_DHCPDDNS(), isc::d2::D2Parser::make_SUB_DNS_SERVER(), isc::d2::D2Parser::make_SUB_HOOKS_LIBRARY(), isc::d2::D2Parser::make_SUB_TSIG_KEY(), isc::d2::D2Parser::make_SUB_TSIG_KEYS(), isc::d2::D2Parser::make_TOPLEVEL_DHCPDDNS(), isc::d2::D2Parser::make_TOPLEVEL_JSON(), isc::d2::D2ParserContext::PARSER_DDNS_DOMAIN, isc::d2::D2ParserContext::PARSER_DDNS_DOMAINS, isc::d2::D2ParserContext::PARSER_DHCPDDNS, isc::d2::D2ParserContext::PARSER_DNS_SERVER, isc::d2::D2ParserContext::PARSER_HOOKS_LIBRARY, isc::d2::D2ParserContext::PARSER_JSON, isc::d2::D2ParserContext::PARSER_SUB_DHCPDDNS, isc::d2::D2ParserContext::PARSER_TSIG_KEY, and isc::d2::D2ParserContext::PARSER_TSIG_KEYS.

+ Here is the call graph for this function:

◆ while()

while ( 1 )

Definition at line 1564 of file d2_lexer.cc.

References isc::d2::D2ParserContext::AUTH_TYPE, isc::d2::D2ParserContext::AUTHENTICATION, BEGIN, isc::d2::D2ParserContext::CLIENTS, COMMENT, isc::d2::D2ParserContext::CONFIG, isc::d2::D2ParserContext::CONTROL_SOCKET, isc::d2::D2ParserContext::CONTROL_SOCKET_TYPE, isc::d2::D2ParserContext::DDNS_DOMAIN, isc::d2::D2ParserContext::DDNS_DOMAINS, isc::d2::D2ParserContext::DHCPDDNS, DIR_ENTER, DIR_EXIT, DIR_INCLUDE, isc::d2::D2ParserContext::DNS_SERVER, isc::d2::D2ParserContext::DNS_SERVERS, ECHO, EOB_ACT_CONTINUE_SCAN, EOB_ACT_END_OF_FILE, EOB_ACT_LAST_MATCH, isc::d2::D2ParserContext::FORWARD_DDNS, isc::d2::D2ParserContext::HOOKS_LIBRARIES, INITIAL, isc_throw, isc::d2::D2ParserContext::LOGGERS, isc::d2::D2Parser::make_ALGORITHM(), isc::d2::D2Parser::make_AUTHENTICATION(), isc::d2::D2Parser::make_BASIC(), isc::d2::D2Parser::make_BOOLEAN(), isc::d2::D2Parser::make_CERT_FILE(), isc::d2::D2Parser::make_CERT_REQUIRED(), isc::d2::D2Parser::make_CLIENTS(), isc::d2::D2Parser::make_COLON(), isc::d2::D2Parser::make_COMMA(), isc::d2::D2Parser::make_COMMENT(), isc::d2::D2Parser::make_CONTROL_SOCKET(), isc::d2::D2Parser::make_CONTROL_SOCKETS(), isc::d2::D2Parser::make_DDNS_DOMAINS(), isc::d2::D2Parser::make_DEBUGLEVEL(), isc::d2::D2Parser::make_DHCPDDNS(), isc::d2::D2Parser::make_DIGEST_BITS(), isc::d2::D2Parser::make_DIRECTORY(), isc::d2::D2Parser::make_DNS_SERVER_TIMEOUT(), isc::d2::D2Parser::make_DNS_SERVERS(), isc::d2::D2Parser::make_END(), isc::d2::D2Parser::make_FLOAT(), isc::d2::D2Parser::make_FLUSH(), isc::d2::D2Parser::make_FORWARD_DDNS(), isc::d2::D2Parser::make_HOOKS_LIBRARIES(), isc::d2::D2Parser::make_HOSTNAME(), isc::d2::D2Parser::make_HTTP(), isc::d2::D2Parser::make_HTTPS(), isc::d2::D2Parser::make_INTEGER(), isc::d2::D2Parser::make_IP_ADDRESS(), isc::d2::D2Parser::make_JSON(), isc::d2::D2Parser::make_KEY_FILE(), isc::d2::D2Parser::make_KEY_NAME(), isc::d2::D2Parser::make_LCURLY_BRACKET(), isc::d2::D2Parser::make_LIBRARY(), isc::d2::D2Parser::make_LOGGERS(), isc::d2::D2Parser::make_LSQUARE_BRACKET(), isc::d2::D2Parser::make_MAXSIZE(), isc::d2::D2Parser::make_MAXVER(), isc::d2::D2Parser::make_NAME(), isc::d2::D2Parser::make_NCR_FORMAT(), isc::d2::D2Parser::make_NCR_PROTOCOL(), isc::d2::D2Parser::make_NULL_TYPE(), isc::d2::D2Parser::make_OUTPUT(), isc::d2::D2Parser::make_OUTPUT_OPTIONS(), isc::d2::D2Parser::make_PARAMETERS(), isc::d2::D2Parser::make_PASSWORD(), isc::d2::D2Parser::make_PASSWORD_FILE(), isc::d2::D2Parser::make_PATTERN(), isc::d2::D2Parser::make_PORT(), isc::d2::D2Parser::make_RCURLY_BRACKET(), isc::d2::D2Parser::make_REALM(), isc::d2::D2Parser::make_REVERSE_DDNS(), isc::d2::D2Parser::make_RSQUARE_BRACKET(), isc::d2::D2Parser::make_SECRET(), isc::d2::D2Parser::make_SECRET_FILE(), isc::d2::D2Parser::make_SEVERITY(), isc::d2::D2Parser::make_SOCKET_ADDRESS(), isc::d2::D2Parser::make_SOCKET_NAME(), isc::d2::D2Parser::make_SOCKET_PORT(), isc::d2::D2Parser::make_SOCKET_TYPE(), isc::d2::D2Parser::make_STRING(), isc::d2::D2Parser::make_TCP(), isc::d2::D2Parser::make_TRUST_ANCHOR(), isc::d2::D2Parser::make_TSIG_KEYS(), isc::d2::D2Parser::make_TYPE(), isc::d2::D2Parser::make_UDP(), isc::d2::D2Parser::make_UNIX(), isc::d2::D2Parser::make_USER(), isc::d2::D2Parser::make_USER_CONTEXT(), isc::d2::D2Parser::make_USER_FILE(), isc::d2::D2ParserContext::NCR_FORMAT, isc::d2::D2ParserContext::NCR_PROTOCOL, isc::d2::D2ParserContext::OUTPUT_OPTIONS, isc::d2::D2ParserContext::REVERSE_DDNS, isc::d2::D2ParserContext::TSIG_KEY, isc::d2::D2ParserContext::TSIG_KEYS, yy_act, yy_bp, YY_BREAK, YY_BUFFER_NEW, YY_BUFFER_NORMAL, yy_cp, YY_CURRENT_BUFFER, YY_CURRENT_BUFFER_LVALUE, YY_DO_BEFORE_ACTION, YY_END_OF_BUFFER, YY_FATAL_ERROR, yy_flex_debug, YY_MORE_ADJ, YY_NEW_FILE, YY_RESTORE_YY_MORE_OFFSET, YY_RULE_SETUP, YY_SC_TO_UI, YY_START, YY_STATE_EOF, yyin, yyleng, yytext, yytext_ptr, and yywrap.

+ Here is the call graph for this function:

◆ yy_create_buffer()

YY_BUFFER_STATE yy_create_buffer ( FILE * file,
int size )

Allocate and initialize an input buffer state.

Parameters
fileA readable stream.
sizeThe character buffer size in bytes. When in doubt, use YY_BUF_SIZE.
Returns
the allocated buffer state.

Definition at line 3349 of file d2_lexer.cc.

References yy_buffer_state::yy_buf_size, yy_buffer_state::yy_ch_buf, YY_FATAL_ERROR, yy_init_buffer, yy_buffer_state::yy_is_our_buffer, and yyalloc.

◆ yy_delete_buffer()

void yy_delete_buffer ( YY_BUFFER_STATE b)

Destroy the buffer.

Parameters
ba buffer created with yy_create_buffer()

Definition at line 3384 of file d2_lexer.cc.

References yy_buffer_state::yy_ch_buf, YY_CURRENT_BUFFER, YY_CURRENT_BUFFER_LVALUE, yy_buffer_state::yy_is_our_buffer, and yyfree.

◆ yy_flush_buffer()

void yy_flush_buffer ( YY_BUFFER_STATE b)

Discard all buffered characters.

On the next scan, YY_INPUT will be called.

Parameters
bthe buffer state to be flushed, usually YY_CURRENT_BUFFER.

Definition at line 3448 of file d2_lexer.cc.

References yy_buffer_state::yy_at_bol, yy_buffer_state::yy_buf_pos, YY_BUFFER_NEW, yy_buffer_state::yy_buffer_status, yy_buffer_state::yy_ch_buf, YY_CURRENT_BUFFER, YY_END_OF_BUFFER_CHAR, yy_load_buffer_state, and yy_buffer_state::yy_n_chars.

◆ yy_scan_buffer()

YY_BUFFER_STATE yy_scan_buffer ( char * base,
yy_size_t size )

Setup the input buffer state to scan directly from a user-specified character buffer.

Parameters
basethe character buffer
sizethe size in bytes of the character buffer
Returns
the newly allocated buffer state object.

Definition at line 3597 of file d2_lexer.cc.

References yy_buffer_state::yy_at_bol, yy_buffer_state::yy_buf_pos, yy_buffer_state::yy_buf_size, YY_BUFFER_NEW, yy_buffer_state::yy_buffer_status, yy_buffer_state::yy_ch_buf, YY_END_OF_BUFFER_CHAR, YY_FATAL_ERROR, yy_buffer_state::yy_fill_buffer, yy_buffer_state::yy_input_file, yy_buffer_state::yy_is_interactive, yy_buffer_state::yy_is_our_buffer, yy_buffer_state::yy_n_chars, yy_switch_to_buffer, and yyalloc.

◆ yy_scan_bytes()

YY_BUFFER_STATE yy_scan_bytes ( const char * yybytes,
int _yybytes_len )

Setup the input buffer state to scan the given bytes.

The next call to yylex() will scan from a copy of bytes.

Parameters
yybytesthe byte buffer to scan
_yybytes_lenthe number of bytes in the buffer pointed to by bytes.
Returns
the newly allocated buffer state object.

Definition at line 3651 of file d2_lexer.cc.

References YY_END_OF_BUFFER_CHAR, YY_FATAL_ERROR, yy_buffer_state::yy_is_our_buffer, yy_scan_buffer, and yyalloc.

◆ yy_scan_string()

YY_BUFFER_STATE yy_scan_string ( const char * yystr)

Setup the input buffer state to scan a string.

The next call to yylex() will scan from a copy of str.

Parameters
yystra NUL-terminated string to scan
Returns
the newly allocated buffer state object.
Note
If you want to scan bytes that may contain NUL values, then use yy_scan_bytes() instead.

Definition at line 3636 of file d2_lexer.cc.

References yy_scan_bytes.

◆ yy_switch_to_buffer()

void yy_switch_to_buffer ( YY_BUFFER_STATE new_buffer)

Switch to a different input buffer.

Parameters
new_bufferThe new input buffer.

Definition at line 3292 of file d2_lexer.cc.

References YY_CURRENT_BUFFER, YY_CURRENT_BUFFER_LVALUE, yy_load_buffer_state, and yyensure_buffer_stack.

◆ yyalloc()

void * yyalloc ( yy_size_t size)

Definition at line 3888 of file d2_lexer.cc.

◆ yyfree()

void yyfree ( void * ptr)

Definition at line 3906 of file d2_lexer.cc.

◆ yypush_buffer_state()

void yypush_buffer_state ( YY_BUFFER_STATE new_buffer)

Pushes the new state onto the stack.

The new state becomes the current state. This function will allocate the stack if necessary.

Parameters
new_bufferThe new state.

Definition at line 3482 of file d2_lexer.cc.

References YY_CURRENT_BUFFER, YY_CURRENT_BUFFER_LVALUE, yy_load_buffer_state, and yyensure_buffer_stack.

◆ yyrealloc()

void * yyrealloc ( void * ptr,
yy_size_t size )

Definition at line 3893 of file d2_lexer.cc.

◆ yyrestart()

void yyrestart ( FILE * input_file)

Immediately switch to a different input stream.

Parameters
input_fileA readable stream.
Note
This function does not reset the start condition to INITIAL .

Definition at line 3268 of file d2_lexer.cc.

References YY_BUF_SIZE, yy_create_buffer, YY_CURRENT_BUFFER, YY_CURRENT_BUFFER_LVALUE, yy_init_buffer, yy_load_buffer_state, yyensure_buffer_stack, and yyin.

◆ yyset_debug()

void yyset_debug ( int debug_flag)

Definition at line 3795 of file d2_lexer.cc.

References yy_flex_debug.

◆ yyset_extra()

void yyset_extra ( YY_EXTRA_TYPE user_defined)

◆ yyset_in()

void yyset_in ( FILE * _in_str)

Set the input stream.

This does not discard the current input buffer.

Parameters
_in_strA readable stream.
See also
yy_switch_to_buffer

Definition at line 3780 of file d2_lexer.cc.

References yyin.

◆ yyset_lineno()

void yyset_lineno ( int _line_number)

Set the current line number.

Parameters
_line_numberline number

Definition at line 3768 of file d2_lexer.cc.

References yylineno.

◆ yyset_out()

void yyset_out ( FILE * _out_str)

Definition at line 3785 of file d2_lexer.cc.

References yyout.

Variable Documentation

◆ yy_act

int yy_act

Definition at line 1486 of file d2_lexer.cc.

Referenced by while().

◆ yy_bp

char * yy_bp

Definition at line 1485 of file d2_lexer.cc.

Referenced by while().

◆ yy_cp

char* yy_cp

Definition at line 1485 of file d2_lexer.cc.

Referenced by while().

◆ YY_DECL

YY_DECL
Initial value:
{
yy_state_type yy_current_state
yy_state_type
int yy_state_type
Definition agent_lexer.cc:660

The main scanner function which does all the work.

Definition at line 1482 of file d2_lexer.cc.

◆ yy_flex_debug

int yy_flex_debug = 1

Definition at line 1150 of file d2_lexer.cc.

◆ yyin

FILE* yyin = NULL

Definition at line 658 of file d2_lexer.cc.

◆ yyleng

int yyleng

Definition at line 590 of file d2_lexer.cc.

◆ yylineno

int yylineno = 1

Definition at line 663 of file d2_lexer.cc.

◆ yyout

FILE * yyout = NULL

Definition at line 460 of file d2_lexer.cc.

◆ yytext

char* yytext

Definition at line 1172 of file d2_lexer.cc.